T-400BE

Tensor T-400BE takes print quality to the next level for newspaper and semi-commercial applications. 

High Production
  • Speed of 40,000 IPH (optional upgrade to 45,000 IPH)
  • Rapid makeready
High Print Quality
  • Helical drive design on the gear train virtually eliminates
    dot distortion
  • Tensor’s unique “bearing-in-a-bearing” eccentric design
    provides optimum dynamic support of the blanket cylinders,
    reducing print disturbances
  • Bearers on both the plate and blanket cylinders
    increase stability
  • Reel rod type, narrow-gap blanket lock-ups reduce
    disturbance and maximize image area
Highly Automated Controls
  • State-of-the-art drives and controls provide optimum
    efficiency with minimal waste
  • Shafted or footprint shaftless drives with integrated
    logistics for all auxiliary equipment
High Design Standards
  • Tapered journal design on plate cylinders provides improved
    stiffness for outstanding print and registration control
  • Quick “no tool” plate change design encourages versatility
    of products
Standard Features And Specifications

Plate & Blanket Cylinders

  • Stainless steel clad cylinders provide unsurpassed durability and
    corrosion resistance
  • Bearers on blanket and plate cylinders for added stability
  • Motorized registration
  • Ultra-narrow gap (1/16″, 1.52mm) plate cylinders with
    register pin
  • Reel-rod lock-up on blanket cylinders
  • Timken tapered cylinder bearings
  • Heavy-duty impression linkages and tapered journals
    ensure stability
  • Helical drive gears with slip rim hubs

Inking & Dampening System

  • Brush dampeners
  • Swing-down cast iron ink fountains for rapid, easy color clean-up
  • Self-sealing ink fountain ends
  • Helical gear drive train
  • 8 roller ink train with 2 ink forms
  • Motorized ink fountain rollers with adjustable curve
  • Nylon micrometric rollers and nylon vibrator rollers
  • Bearing-mounted ink vibrators with positive seal feature

Operation & Drive System

  • Line driven shaft configuration
  • Oil bath gear housing with self-contained mechanical pump
  • Spiral bevel ring and pinion gear for better mesh, longer life
    and a quieter, smoother running press
  • Motorized sidelay on both cylinders
  • Motorized circumferential on the #10 cylinder
  • Motorized unit-to-unit register
  • Centralized grease lubrication system
  • Form roller throw-off shafts located outside of the rollers
    to eliminate ink build-up and maintenance issues
  • Pneumatic throw-off for impression, ink form, dampener
    form and ink feed rollers with individual #10 and #13 controls
  • Lexan drive side doors for easy visual inspection
    and maintenance
  • Removable panels on operator’s cover allow easy access
    to components
  • Interlocked safety guards

 

Technical Specifications

  • Running sidelay register:
  • +.160″ IN, -.160″ OUT
  • +4.06mm IN, -4.06mm OUT
    Running circumferential register:
  • +.060″ Advance, -.060″ Retard
  • +1.5mm Advance, -1.5mm Retard
  • Press Speed:
  • 40,000 IPH
  • 45,000 IPH available with oil cooling upgrade package
    Unit dimensions @ 36″ Web:
  • 32″H x 75″W x 50″L
  • 812mm H x 1905mm W x 1270mm L
    Unit Weight:
  • 6,200 lbs. (approx. ship weight)
  • 2,812 kilos (approx. ship weight)

Available Options

  • Footprint shaftless configuration with reverse inch
    Spray dampening
    Segmented ink fountain blades
    Water and ink controls at the console
  • > Non-linear tracking with press speed
  • • Automatic remote inking system
  • • Automatic register control systems
  • • Heatset or UV packages
  • • Optional oil cooling to increase speed to 45,000 IPH
  • • Chilled ink vibrators

Cutoff and Web Widths

Cutoff:

  • 19″ through 27.6″ (482mm through 700mm)
    Web widths:
  • 29″ through 40″ (737mm through 1016mm)

T-460

Full bearer press design for enhanced dot reproduction and the ability to print fine screen work

SUPERLATIVE PRESS PERFORMANCE
  • Speed up to 46,000 IPH (with unit shaftless drive)
  • Only Available with Unit Shaftless Design
  • Three ink form roller design
  • Robust construction – 35,000 lb (15,876 kilos) 4-high tower
  • Outstanding Print Quality

Cutoff: 21” through 22.750” (533mm through 578mm)

Web Widths (cut-off dependent): 36″ through 40″ (914mm through 1016mm)

Outstanding Print Quality
    • Three ink form rollers with three ink vibrators for high coverage inking capability
    • Engineered specifically to maximize print results with third ink form roller design
    • Large capacity ink fountains
    • Ink form rollers swing out for easy plate-up access on both sides of the press

    High-strength cast iron frames for outstanding stability and endurance

    • Full bearer press design for enhanced dot reproduction and the ability to print fine screen work
    • Bearing-in-a-bearing technology offers full cylinder support at high press speeds when using conventional narrow gapped blanket technology
    • Ability to run 3-across formats up to 40″ web widths
Highly Automated Controls
  • State-of-the-art drives and controls provide optimum efficiency with minimal waste
  • Unit shaftless drive system with integrated logistics for all auxiliary equipment
Innovative Design
  • Drive side oil lubrication
  • Plate cylinder design provides increased rigidity for outstanding print and registration control
  • Quick “no tool” plate change design encourages versatility of products

T-1400

Tensor T-1400 units offer proven endurance with an ergonomic design and superb value.

 

Value
  • Maximum printing speed of 35,000 IPH
  • Rapid make-ready and quick “no tool” plate change design encourages versatility of product mix
  • The optional reel-type blanket lock-ups reduce cylinder gaps and offer newsprint savings without sacrificing image area

Cutoff: 21” through 24 3/4″ (533mm through 630mm)

Web Widths: 29″ through 40″ (737mm through 1016mm)

Design
  • Unique “bearing-in-a-bearing” eccentric design provides optimum dynamic support of the blanket cylinders, reducing print disturbance
  • Stainless steel clad cylinders with unique tapered journal design add stiffness for improved print and registration control
  • Arch geometry provides enhanced ergonomics for ease of maintenance
Endurance
  • Thousands of T-1400 units in operation worldwide
  • Eccentric design provides unsurpassed durability in the critical frame bore area, thus providing very long equipment service life
  • Centralized lubrication and pneumatics are standard features on the Tensor T-1400 series press; optional motorized registration available

H-50 JAW FOLDER

The Tensor H-50 jaw folder is recognized for its outstanding performance and enduring quality.

Capable
  • Rated up to 50,000 pph
  • 1:2:2 jaw folder offers superior accuracy at high speed
  • Easy changeover capability
  • Web capacity up to twelve webs, dependent on specific application
  • Collect feature available

Cutoff: 19″ through 27.6″ (483mm through 700mm)

Web Widths: 20″ through 40″ (508mm through 1016mm)

Experienced
  • Many repeat purchases due to high customer satisfaction
  • Proven to perform well with all other brands of web presses, making the H-50 an excellent add-on to an existing press line
  • Heavy-duty folder can be utilized with either 1-around or 2-around printing units
Versatile
  • Unique self-adjusting jaw allows effortless conversion from single web to multiple web jobs
  • True conical design on the chrome-plated former board, pre-drilled for air
  • Two driven sets of nipping rings plus provisions for a crosshead perforator are standard
  • Double parallel options allow greater product flexibility for specific market niches
  • Integral ribbon shifters, crosshead, and notch-type spine perforators available
Quarter-Fold Options
  • Two quarter folder designs are available on the H-50 to accommodate both standard newspaper and demanding commercial heat-set folding applications
  • The standard quarter folder boasts high page count capabilities. Available in many cutoff options, it can be fully retrofitted to any existing H-50 folder
  • The enhanced quarter folder is specifically designed for high-speed commercial heat-set applications, catalog, directory, short-run books, and inserts
  • A wide range of paper stocks, including the more difficult SCA and SCB lightweight stocks, are folded with advanced accuracy

H-50 HD JAW FOLDER

The Tensor H-50 HD Heavy Duty offers proven durability with a high web count capability.

Capable
  • Rated up to 50,000 PPH
  • 1:2:2 jaw folder offers superior accuracy at high speed
  • Easy changeover capability
  • Web capacity up to fourteen webs, dependent on the specific application
  • Collect feature available

Cutoff: 19″ through 27.6″ (483mm through 700mm)

Web Widths: 20″ through 40″ (508mm through 1016mm)

Experienced
  • Many repeat purchases of the original H-50 due to high customer satisfaction
  • Superb performance with all other brands of web presses, making the H-50 HD an excellent add-on to an existing press line
  • Heavy-duty folder can be utilized with either 1-around or 2-around printing units
Versatile
  • Unique self-adjusting jaw allows effortless conversion from single web to multiple web jobs
  • True 64° conical design on the chrome-plated former board, with air
  • Two driven sets of oversized nipping rings plus provisions for a crosshead perforator are standard
  • Double parallel options allow greater product flexibility for specific market niches
  • Integral ribbon shifters, crosshead, workbook and notch-type spine perforators available
Quarter-Fold Options
  • Two quarter folder designs are available on the H-50 HD to accommodate both standard newspaper and demanding commercial heat-set folding applications
  • The standard quarter folder boasts high page count capabilities. available in many cutoff options, it can be fully retrofitted to any existing H-50 or H-50 HD folder
  • The enhanced quarter folder is specifically designed for high-speed commercial heat-set applications, catalog, directory, short-run books, and inserts
  • A wide range of paper stocks, including the more difficult SCA and SCB lightweight stocks, are folded with advanced accuracy

H-50 S FULLY SHAFTLESS JAW FOLDER

Unique self-adjusting jaw allows effortless conversion from single web to multiple web jobs

Capable
  • Rated up to 50,000 PPH
  • 1:2:2 jaw folder offers superior accuracy at high speed
  • Easy changeover capability
  • Web capacity up to twelve webs, dependent on specific application
  • Collect feature available

Cutoffs: 19″ through 27.6″ (483mm through 700mm)

Web Widths:  20″ through 40″ (508mm through 1016mm)

Technical Specifications

1/2 FOLD:

  • 12 web capability*

1/4 FOLD:

  • 8 web capability*

FOLDER DIMENSIONS WITH 1/4 FOLD:

  • 106.75″ H x 65.5″ W x 115.75″ L
  • 2711mm H x 1663mm W x 2940mm L

FOLDER WEIGHT:

  • 14,000 lbs. (approximate ship weight)
  • 6,350 kilos (approximate ship weight)
Versatile
  • Unique self-adjusting jaw allows effortless conversion from single web to multiple web jobs
  • Independent drive on the lower folding section
  • Independent drive on the RTF
  • Two sets of nipping rings with independent drive
  • Pneumatic controlled nipping rollers
  • Independent drive for the Quarter Folder
  • Independently driven delivery section for adjusting the shingle on the delivery stream
  • Simplified gearbox design
  • Touchscreen on the folder for folder settings, product configuration, and information
Standard Features
  • Rated up to 50,000 PPH
  • Half-fold product delivered folded edge first
  • Half-fold lap adjustments
  • Pneumatic, independently adjustable RTF trolleys and slitter
  • Former board is conical in shape, chrome plated and predrilled for air
  • Two (2) sets of independently driven nipping rollers always in contact with the web
  • Main folder drive gears are helical in design
  • Jaws are infinitely adjustable for light and heavy products— no shims are required
  • Laser jam detection

* Web capacity dependent upon certain variables and specific applications

T1 FOLDER

Tensor’s T-1 jaw folder is an outstanding economical solution for newspaper applications.

Capable
    • Rated up to 35,000 PPH
    • 1:2:1 cylinder geometry
    • Web capacity up to 8 webs half-folded, or 6 webs quarter-folded

    Cutoff: 19″ through 24.8″ (483mm through 630mm)

    Web Widths: 20″ through 40″ (508mm through 1016mm)

Durable Design
  • Helical main folder drive gears with oil lubrication
  • True conical design on the chrome-plated former board, pre-drilled for air
  • Highly adjustable jaws to easily switch between light and heavy paper stocks, or from single web to multiple web jobs
  • Pneumatically loaded trolleys and slitter at the RTF control panel
  • Independent trolley and slitter pressure adjustments can be individually controlled
  • Two sets of driven nipping rollers
  • Cutoff size driven RTF roller
  • Overload clutches on the horizontal drive and quarter folder for jam protection
  • Heavy-duty frame construction with rigid cross members
  • Operating side delivery extension
Versatile and Economical
  • Accepts all standard newspaper sizes and thicknesses
  • Outstanding economic value with exceptional, proven performance
  • Excellent addition to existing press lines of all manufacturers
  • Flexible solution with fast ROI

Professional metal processing. Highly experienced & equiped personnel

PT. INDOPRIMA BATARA KRIDA

Our steel production company welcomes you on its own website. Read special news, look through our products and services and much more.

OUR SOLUTIONS

  • Printing Solution
  • Fast Print Machine
  • Good Engine
  • Special Treatment
  • Good Quality
  • Best Price
  • Guaranteed

ADDRESS

 

PT. Indoprima Batara Krida
 

Boulevard Raya Barat
Ruko Grand Galaxy City
Blok RSO C No. 18
Bekasi 17147

Phone 62-21-82735449

Email : info@indoprima.id